AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 108)

SIP – DECT OM System Manual Release 2.1 6 OM Management Portal (OMP)
depl-1230/1.3 Page: 108 (196)
• User name : The SIP Authentication user name is optional but recommended. It
represents the name which will be used during SIP registration and authentication. If no
name is given the number will be used by default.
• Password , Password confirmation : The password will be used during SIP registration
and authentication. Enter the appropriate data in these fields.
“DECT” tab
This tab enables to configure the DECT part for the PP dataset. When configuring a device
(see 6.8.3), only the
DECT tab is shown in the PP detail panel.
• IPEI : The IPEI is the DECT 142 / 6xxd handset IPEI number which can be found in the
System Options menu of the DECT 142 / 6xxd handset.
• DECT authentication code : The DECT authentication code is used during initial DECT
subscription as an security option and can be set here for each PP device separately. If a
global DECT authentication code is given on the
System settings page (see chapter
6.5.1), this value is filled in here as default. This parameter is optional.
• Encryption : If the encryption feature is enabled for the whole system (in the System
settings menu, see chapter 6.5.1), you can de-activate the DECT encryption for this
device.
Please note: The PP device has to support DECT encryption which is not a mandatory
feature.
• Delete subscription : This option is only available when configuring an existing PP. If this
option is activated, the subscription data will be deleted which also requires a re-
subscription of the handset device.