AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 168)

SIP – DECT OM System Manual Release 2.1 8 Maintenance
depl-1230/1.3 Page: 168 (196)
8.3.5.4 RFP Console Commands
If you type ip_rfpconsole you are able to use the following commands on each RFP:
Command Description
? Displays Command Help Table
help Displays Command Help Table
logger Send a string to the syslog daemon
deftrc Resets all trace settings to default
dsp Shows channel config
dump Creates system state dump file /tmp/sys_dump.txt.gz
mem Show memory and heap
exit Leave this console
heap Shows heap buffer statistics
lec Adjust linear echo canceler parameters
media Display state of media channels
mutex Lists all created MXP mutexes
omms Shows connection status to OMM(s)
queues Lists all created MXP queues
reset Resets the IPRFP application
resume Resume bmc activity
rsx Allows RSX connection to BMC via TCP
sem Lists all created MXP semaphores
spy Set/display spy levels: [ <key #> <level #> ]
suspend Suspend bmc activity
tasks Lists all running MXP tasks
voice Displays the state of voice handling
wlan Configure wlan card on cmdline
The “spy” command enables you to increase the level of syslog messages. This should
be only used by instructions of the support organization because it can harm
the system operation.
8.3.5.5 OMM Console Commands
If you have opened the session on the OMM RFP and you type “ommconsole”, you are able
to use the following OpenMobility Manager (OMM) related commands:
Command Description
? Displays Command Help Table
adb Automatic DB export and import (ADB) console