AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 30)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 30 (196)
5 OMM Web Service
The OMM acts as an HTTP/HTTPS server. The HTTP server binds to port 80 and HTTPS
binds to port 443 by default. A HTTP request on port 80 will be redirected to HTTPS on
port 443. The service access is restricted to one active session at a time and is password
protected.
The browser used for service access has to be at least Microsoft Internet Explorer 6.0 or
Mozilla Firefox 1.5 and must have frame support, JavaScript and cookies enabled.
Note: The service access is restricted to one active session at a time and is password
protected.
5.1 Login
The OMM allows only one user at a time to configure the system. A user must authenticate
with a user name and a password. Both strings are checked case sensitive.
With initial installation or after discarding all settings, the OMM Web service is accessible via
a default build-in user account with user “omm” and password “omm”.
With the first login into a new SIP – DECT SW version the user has to accept the End User
License Agreement (EULA), see chapter 5.11.
If the default build-in user account is active, the administrator has to change the default
account data (passwords) of the “Full access” and “root” account. Refer Initial Setup (see
chapter 2.2). The meaning of the different account types is described in section 7.12.1.
Please note: The OMM will force to alter the default account data. As long as the
passwords are unchanged, the OMM will not allow any other configuration.
After login in, the following menus are available:
• Status menu:
displays the system status, see chapter 5.3;
• System menu:
allows configuration of general SIP – DECT system parameters, see chapter 5.4;