AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 65)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 65 (196)
5.8 “WLAN” Menu
The WLAN menu allows you to manage the wireless LAN function of all WLAN capable
RFPs that are connected to the OMM. You can view and change wireless parameters and
security settings to adapt the WLAN configuration to suit your needs. You can also check
how many and which wireless clients are currently connected. Nevertheless, the WLAN
function is only available for devices of the type RFP L42. Note also, that you cannot activate
the WLAN function for the OMM, even if the OMM device is an RFP L42.
For a detailed description on WLAN configuration please refer to the section 7.13.
5.8.1 “WLAN profiles” Menu
WLAN settings are grouped in WLAN profiles. You need at least one WLAN profile that can
be assigned to one or more WLAN-RFPs. Of course, you can define more that one WLAN
profile. You can manage / change the desired WLAN settings for a group of WLAN-RFPs by
changing their assigned WLAN profiles. Moreover, you can manage different settings, for
example separate WLAN profiles for different buildings, a special WLAN profile for temporary
use, or WLAN profile for RFPs only useable by guests.
The WLAN profiles menu allows to configure and administrate these WLAN profiles. The
following tasks can be performed:
• Creating and changing WLAN profiles (see chapter 5.8.1.1),
• Deleting WLAN profiles (see chapter 5.8.1.2).
The defined WLAN profiles are then assigned to one or more WLAN RFPs (see chapter
5.8.2). Note, that some device-specific WLAN settings are not part of a WLAN profile, such
as the channel and the antenna configuration. These settings are defined separately for each
RFP (see chapter 5.6.3).
5.8.1.1 Creating and Changing WLAN Profiles
You need at least one active WLAN profile in order to operate the WLAN function for an
RFP L42 device.
1 Navigate to the WLAN profiles page. This page shows the number of existing WLAN
profiles and a list of available WLAN profiles.
2 To add a new WLAN profile, press the New button. To change an existing WLAN profile,
click on the icon available on the left of the WLAN profile entry.
The
New WLAN profile page resp. the WLAN profile [Number] page shows the WLAN
profile configuration.