AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 74)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 74 (196)
The following parameters can be set per LDAP directory entry:
Active flag : allows to enable/disable a specific entry.
• Order : determines the position in the handset menu (1 – top; 5 – bottom).
• Server name (mandatory): Enter the name or IP address of the LDAP server.
• Server port (mandatory): Enter the server port number (default: 389)
Note: SSL (default port 689) is not supported.
Windows® Active Directory Server uses port 3268.
• Search base : The search base has to be edited (e.g. “ou=people,o=my com”).
• User name , Password : User name (a distinguished name) and password may be filled, if
requested by the LDAP Server. Otherwise an anonymous bind takes place.
Note: The DECT IP OMM supports LDAP simple bind.
• Search type : Searches will be done for one of the following attributes:
– Name (sn) // Surname (default)
– First name (Given name)
• Display type : Selection between the following two alternatives is possible:
– Surname (sn), first name (given name) (default)
– first name (Given name) and Surname (sn)
• Server search timeout : The search results will be accepted within the entered search
time (value range: 1 - 99 sec).
The configuration is valid for all PP handsets which support the LDAP directory feature. To
make search requests unique for different users the search base configuration can include
space holders which are replaced by user specific values when submitting the LDAP request
to a server.
The following placeholders are defined:
• “<TEL>” which is replaced by the specific telephone number of the user,
• “<DESC1>” which is replaced by the “Description 1” attribute value of the user
• “<DESC2>” which is replaced by the “Description 2” attribute value of the user
Note: The telephone number in SIP - DECT is not limited to numeric character.
5.9.2.2 Deleting LDAP Entries
To delete an existing LDAP directory entry:
3 On the Directory page click on the icon left behind the entry.
The Delete LDAP entry? dialog opens showing the current configuration of this entry.
4 Press the Delete button.
5.9.3 “Feature access codes” Menu
Features access codes (FAC) allow to perform specific actions on the OMM from any
subscribed DECT handset.