AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 47)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 47 (196)
5.4.6.4 Automatic Database Export
The automatic database export feature allows an automatic database backup to an external
server for each configuration modification.
If this feature is activated, the OMM transfers a backup file to a configured external server
any time configuration changes occur, e.g. handset subscription. If there is no configuration
change, then no backup will be done. A backup file will be overwritten during a day if there is
more than one modification. A new file will be created when this first change occurs at the
day.
Please note: For an automatic database export a time synchronization with an NTP server
is mandatory. For NTP server configuration see chapter 7.5.4 and chapter 7.6.
In the Automatic export section of the DB management page enter the following:
1 Active : Activate this option to enable the automatic export feature.
2 Protocol : Select the preferred protocol.
3 Server : Enter the IP address or the name of the server.
4 User name , Password : If necessary, enter the account data of the server.
5 File : Enter the path and filename where the database is to be saved.
The OMM writes the database into a file on the external server with following name
convention:
<yymmdd>_<system_name>_<PARK>_omm_conf.gz
6 Press the OK button.