Tatic, Ocal, Onfiguration of an – AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN User Manual
Page 135: Rfp (om c, Onfigurator, Chapter 7.6), Le rfp (see chapter 7.6)
SIP – DECT OM System Manual Release 2.1
7 Configuration und Administration Aspects
depl-1230/1.3
Page: 135 (196)
7.6
Static Local Configuration of an RFP (OM Configurator)
As an alternative to DHCP configuration, the RFPs/OMM may be individually statically
configured using the OM Configurator tool.
Note: The OM Configurator requires the Java Runtime Environment version 1.6 or higher.
The settings, which are configured on the RFP with the tool OM Configurator, will be saved
permanently in the internal flash memory of the RFP.
There are two modes of operation.
•
The OM Configurator is used to set a VLAN ID but other parameters are still requested via
DHCP.
OR
•
All parameters are set via the OM Configurator and DHCP is not used anymore.
The parameters configurable via the OM Configurator comply with the DHCP option,
please see chapter 7.5.4 for details.