AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 56)

SIP – DECT OM System Manual Release 2.1 5 OMM Web Service
depl-1230/1.3 Page: 56 (196)
5.6.5 Capturing RFPs
RFPs, which are assigned to the OMM by DHCP options or OM Configurator settings, may
plug to the system.
1 On the Radio fixed parts page press the Start button.
After a while the list page is filled by the MAC addresses of those RFPs which tried to
register to the OMM (unregistered RFPs).
Note: Please note that these entries are not really stored (they are lost after reset).
2 By pressing the customize icon of the appropriate RFP, you can add further data and
store the RFP (see chapter 5.6.3).
5.6.6 Deleting RFPs
To delete an existing RFP:
1 On the Radio fixed parts page click on the icon left behind the RFP entry.
The Delete radio fixed part? dialog opens showing the current configuration of this RFP.
2 Press the Delete button.
Please note: The RFPs bound to a license (License RFPs) can not be deleted. The License
RFPs are displayed in the RFP list with a license icon instead of the trash
icon. For further information on licenses see chapter 4).
5.7 “Portable parts” Menu
The Portable parts web page provides an overview of all configured DECT handsets
(Portable Parts) sorted by their number. To keep the list concise, the complete list is split up
into sub lists containing up to 100 handsets. The user can move back and forth in steps of
100 handsets.