AASTRA SIP-DECT (Release 2.1)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 112)

SIP – DECT OM System Manual Release 2.1 6 OM Management Portal (OMP)
depl-1230/1.3 Page: 112 (196)
6.8.9 Selecting Columns
You can adapt the parameters shown in the PP table to your needs:
1 In the task bar on the right of the Portable parts panel click on the Select columns
command.
The
Select columns dialog opens.
2 Select the columns that shall be shown by activating the appropriate checkboxes.
3 Click the OK button.
The PP table will be adapted accordingly.
6.8.10 Filtering PP Table
You can filter the list of PP datasets shown in the PP table by using a filter.
1 In the task bar on the right of the Portable parts panel click on the Filter command.
The Filter PPs dialog opens.
2 Enter the search string that serves as filter criterion. You can enter digits and characters.
The search is case sensitive.
3 Click on the Filter button.
The Filter PPs dialog is closed and the PP table will be adapted accordingly.
4 To reset the filter, click on the Filter command in the task bar on the right of the Portable
parts panel.
5 In the Filter PPs dialog click on the Reset button.