Ohmmeter checks – Xylem GSSERVICE R2 Service Manual Submersible Pumps & Jet Pumps User Manual
Page 75
Advertising
73
Power supply OFF. Disconnect motor leads
(L1 and L2). On dual-voltage motors, motor
must be wired 230V for the checks listed
below and illustrated on the page indicated
for each check. Rewire for 230V if necessary.
CHECK: Page
a. Ground ..........................................................74
b. Winding Continuity ...............................75-77
c. Contact Points (Switch) ...............................78
d. Overload Protector ................................79-81
e. Capacitor ......................................................82
CAUTION
Use ohmmeter only with POWER OFF.
OHMMETER CHECKS
Advertising