Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide - Manual (Page 102)

Leak Detection Sensors Page 17 - 7 17
Worksheet # 17-4 – Output Groups – Sensor Channels 25 to 32
Fill-in the work sheet below and compare assignments with other work-sheets to
uncover conflicts before programming output devices. (For TS-2001/508 only).
A maximum of
3 alarm Output
Groups ( OG )
can appear per
channel # N...
TSP-DDS &
TSP-DTS
sensors have
3 alarms:
water,
product &
sump full.
Alarm OGs are:
STD (standard)
PROD
(product)
WATER OG
SMP FL
(sump full)
DRY WL
(dry well)
HGH BR (high
brine level)
LOW BR (low
brine level)
VAPOR OG
Write-in all
alarm OG
for each
sensor
channel #.
OG = Output Group - Output Group Assignment WORKSHEET Output Group choices -
Sensor Chnl #25: NONE
A
B
C
Sensor Chnl #26: D
E
F
G
Sensor Chnl #27: H
I
J
K
Sensor Chnl #28:
L
M
N
O
Sensor #29 (TS-2001): P
Q
R
S
Sensor #30 (TS-2001): T
U
V
W
Sensor #31 (TS-2001): X
Y
Z
AA
Sensor #32 (TS-2001): BB
CC
DD
EE
example: FF
STD OG 32 1 P
Could activate the annunciator to indicate a liquid was
detected (standard sensor shown)
ALL
Output Devices: Modulated Annunciator, Solid Annunciator, Relay 1, Relay 2, I/O Output Module
Channel # 1 to # __ (record all OG Assignments in the vertical column)