Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide - Manual (Page 43)

5 Page 5- 2 Tank Sentinel Setup Programming Guide
Product Data Menu (C
ONTINUED
...
FROM PREVIOUS PAGE
)
COPY FROM PRODUCT DATA X TO N Press ( M ) key to select a PRODUCT # to copy.
PRODUCT 1
PRODUCT 2
Press UP/DOWN ▲ ▼ to display product in tanks 5 – 8.
:
PRODUCT 8
COPY PRODUCT DATA X TO N
PRESS ENTER IF YOU ARE SURE?
Press ENTER to accpept this data.
(press CANCEL to prevent copying product data)
NAME (rename product if necessary) Press M2 key.
PRODUCT NAME N
PROD N
9 characters (ie. 87 Octane/Cetane)
( optional input a new name of the PRODUCT in Tank N)
Use keypad to enter product names.
Press
ENTER to accept this data.
TYPE Press M3 key.
PRODUCT TYPE N (Select a Standard or Special product type in tank N)
UNLEADED REG Press UP/DOWN ▲ ▼ to choose a product type.
UNLEADED PLS
UNLEADED XTR
(N = tank Number... 5 – 8 for TS-2001/508)
UNLEADED SUP
DIESEL
KEROSENE
#2 FUEL OIL
ETHANOL
Select a special product (SPECIAL N) when the
SPECIAL 1 product in the tank does not match choices here.
: See SPECIAL PRODUCTS menu for programming.
SPECIAL 8
LEADED REG
Press ENTER to accept this data.
SPECIAL PRODUCTS Menu
Program SPECIAL PRODUCTS when this menu
appears
(The SPECIAL PRODUCTS menu *
appears only after a SPECIAL product TYPE is
selected from the Product Data Menu).
To access this menu, go back to the parent
PRODUCTS menu, and choose SPECIAL (
M2 ).
SPECIAL PRODUCTS
SPECIAL 1 Press the ( M ) key to select a Special product#.
SPECIAL 2
: (N = 1 – 8... 5 – 8 for TS-2001/508)
SPECIAL 8
SPECIAL PRODUCT N (Optional - used to copy product data)
COPY Press M1 key.
COPY FROM SPECIAL PRODUCT X TO N Press ( M ) key to select a product to copy.
SPECIAL 1
SPECIAL 2
Press UP/DOWN ▲ ▼ to display special products
: 5 – 8 (TS-2001/508 only).
SPECIAL 8
NOTES
☞