Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide User Manual
Page 144
23
Page
23 - 10
Tank Sentinel Setup Programming Guide
—
TPI Group
continued —
MODE
(user entry)
Here is the MODE GROUP 2 user entry field
display.
NONE is the default setting ....
Use the
UP
/
DOWN
▲
▼
keys to change the
default mode and scroll through the other
modes - LEVELING and PRIORITY ....
Press the
ENTER
key to accept data entry.
This entry returns the display to the GROUP
N menu.
If PRIORITY is selected,
Proceed to the RESERVE
menu, which is described
next ....
RESERVE
(user entry)
Here is the GROUP 2 main menu, displaying
TYPE, MODE and RESERVE ....
Press the
M3
key to display the RESERVE
menu ....
The RESERVE user entry field displays the
“percent full” value for GROUP 2 (in Priority
mode). The default setting is 20.
Press the
M4
key to backspace and erase
the default percent value. This will clear the
field.
— continued on the next page —
MODE GROUP 2
(UP/DN)
NONE
GROUP 2
TYPE
MODE
R E S E R V E
MODE GROUP 2
(UP/DN)
P R I O R I T Y
GROUP 2
TYPE
MODE
R E S E R V E
M1
M2
M3
M4
RESERVE PERCENT GROUP 2
NUMERIC
2 0
BACKSPACE
M1
M2
M3
M4