Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide - Manual (Page 147)

Upgrade Page 24 - 1 24
24 Upgrade Menu
TS-UPGRADE
Additional hardware and/or software features can be added to the Tank Sentinel system
by ordering a TS-UPGRADE. Read this entire chapter before attempting to upgrade the
Tank Sentinel system. Setup programming is required after the upgrade is performed.
WARNINGS —
• Do not attempt an upgrade without the correct upgrade
password and 3 upgrade strings (codes)!
• Repeated upgrade attempts that fail will damage the equipment!
• Avoid unauthorized upgrade attempts!
• Upgrade codes can be used only once!
Exact instructions and a unique upgrade password and upgrade strings will be sent to you
on receipt of:
1) Your Purchase Order number
2) Console Serial Number (verify that it is correct)
3) Hardware requirement(s)
4) Software requirement(s)
5) Your Name and Shipping Address
A FAX -transmittal can be sent upon request... provide your Fax number
The upgrade instructions that are sent to you are both console and serial-number specific.
The upgrade will, therefore, not work with any other console !
Verify that the input password is correct before pressing the ENTER key.
See the next page for a keypad key review.
Contents:
TS-UPGRADE
Upgrade Menu See the Table of Contents to find topics in
this manual. See the Preface for general
information about this manual. And see the
Installation, Operator’s, TroubleShooting
Guides, and Application Notes for other
reference material.