Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide - Manual (Page 148)

24 Page 24 - 2 Tank Sentinel Setup Programming Guide
COMMAND
( # 3 ) N
UMERIC
number or special character
( # 2 )
N...Z
( # 1 )
A...M
input a
letter
Press the ACK SHIFT Key
to toggle between input
character type ( # 1 ) & ( # 3 )
then press the Key of choice.
The upper
right corner
of the display
shows the
input
selection
...shown
here
within
dashed
lines
Typical
Key
Upgrade Menu
H U
MENU
×
Press this key and follow the
7
highlighted sequence below
This message is displayed briefly, before the
next message.
Upgrade Steps:
1 ) Use the keypad to input and enter the
upgrade password that was provided.
( Note: spaces are inserted automatically )
See this example at left,
and the next display
(if an upgrade code is incorrect)
NOTE
☞
Keypad Key Use – Review:
• Press CANCEL to cancel an input
• Press M4 to backspace over / delete one character to
the left of the cursor
ï
• Press M2 to move the cursor right
ð
• Press M1 to move the cursor left
ï
• Use the ENTER key to accept / enter data
• Press the ACK SHIFT key to toggle between the input
types: an A...M letter (#1) and numeric (#3). Hexadecimal
letters A thru F – or – numeric inputs 0 thru 9 are allowed.
(0 = zero) .
SELECT MENU OPTION
SETUP UPGRADE LANGUAGE DATALOG
M1 M2 M3 M4
WARNING – ILLEGAL UPGRADE ATTEMPTS
WILL DAMAGE THE SYSTEM !
M1 M2 M3 M4
ENTER UPGRADE PASSWORD CODE NUMERIC
M1 M2 M3 M4
ENTER UPGRADE PASSWORD NUMERIC
51C1 51C2 51C3 51C4 BACKSPACE
M1 M2 M3 M4
example UPGRADE password