Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide - Manual (Page 156)

27 Page 27 - 2 Tank Sentinel Setup Programming Guide
DISPLAY Navigation/Descriptions (C
ONTINUED
...
FROM PREVIOUS PAGE
)
Descriptions —
Please read the following descriptions of each DISPLAY menu:
CPM — shows the current state of the system: VOLTS, AMPS and STATUS
AST — shows current pressure reading for each pressure probe: PSI
SCALD — shows the current status and algorithm version
PUMPS — shows many readings from a Turbine Pump Controller
Special PUMPS navigation —
• Press the ( M ) key aligned below the word PUMPS,
• Press the ( M ) key under each pump number,
(In this example, press the M1 key for PUMP 1 data)
— continued on the next page —
CPM VOLTS AMPS STATUS
15.4 8.7 OK
AST PROBE N
PSI 0.54
SCALD TANK1 TANK2
STATUS 0.02 0.02
SETUP MENU OPTION
SCALD P U M P S
M1 M2 M3 M4
M1 M2 M3 M4
SELECT PUMP (MORE)
P U M P 1 PUMP 2 PUMP 3 PUMP 4