Yokogawa DAQWORX User Manual

Page 100

Advertising
background image

2-70

IM WX103-01E

Trp Ponts

You can display a trip line to indicate a particular value of interest (trip point) in the

waveform display area. Two trip points (trip 1 is red, trip 2 is blue) can be set on each

waveform. The trip line of the waveform corresponding to the left-most Y-axis is shown in

the waveform display area.

Turn ON the trip line display

Trip 1 value

Trip 2 value

Trip line

Trip 1 value

Trip 2 value

Channel Colors

Clicking the channel color displayed in the Color column on the General Display Settings

window opens the Color dialog box. You can select the color of each channel using the

Color dialog box. To create custom colors, click the Define Custom Colors button in the

Color dialog box.

Clppng of Waveforms

By default (clip OFF), the waveform is not displayed when the measured/computed value

exceeds the minimum/maximum value of the scale (see the lower left figure). When clip

is turned ON, values that are smaller than the minimum value of the scale are displayed

as the minimum value and the values that are larger than the maximum value of the

scale are displayed as the maximum value.

Clip OFF

Clip ON

Expandng or Reducng the Tme Axs on the Waveform Dsplay

On the waveform display, you can click the expand/reduce icon to expand or reduce

the time axis for each waveform display area. The maximum magnification is x20. The

minimum magnification varies depending on the size of the waveform display area.

Magnification

Time axis expand/reduce icon

2.10 Startng/Stoppng Data Montorng and Dsplayng the Montor

Advertising
This manual is related to the following products: