Yokogawa DAQWORX - Manual (Page 31)

2-1 IM WX103-01E
1
2
3
4
5
Index
Logger
2.1 Searchng MX100 Data Acquston Unts and
Confgurng the Network
Procedure
Before carrying out the procedure below, turn ON the power to the relevant MX100s and
connect the MX100s to the network using Ethernet cables.
Note
• Connecting MX100s and the PC to a backbone network before proper IP addresses are
assigned to the MX100s may adversely affect other connected devices on the network.
• If runnng under Wndows XP or Wndows Vsta, connecton problems may occur f
the frewall functon s enabled. For detals, see the MX Standard Software User’s
Manual (IM MX180-01E).
Searchng for MX100s
When Startng the Logger for the Frst Tme
1. Start the Logger according to the procedure given in section 1.5.
The System screen of the Main window appears. Icons indicating the MX100s that
are connected to the same network segment are displayed in the MXs nearby area.
Displays the icon of the MX100 in the same segment
Click here to display detailed
communication settings of
the MX100.
Instrument number (NO.) of the MX100
Note
If multiple MX100s are connected in the same network segment, multiple icons are displayed.
In this case, the instrument number that is marked on the name plate of the main module is
displayed on the icon indicating the MX100 (Serial No. on the screen) allowing you to identify
each MX100.
Chapter 2 Logger