Yokogawa DAQWORX - Manual (Page 160)

5-6 IM WX103-01E
Error Messages on the Vewer
Code Message Correctve Acton/Descrpton Reference Page
E0002 Insufficient memory. Please close at
once. Attempting to load multiple files containing close to five
million data points. Insufficient free memory in the PC
virtual memory. Set the size of the PC’s virtual memory to
2 GB or more. 3-2
E0004 File write error. The file cannot be created for some reason. –
E3111 Channels of the specified recording
interval do not exist. Channels with the specified measurement interval do not
exist in the conversion of the data format.
Change to the correct setting. 3-24
E3114 Sampling data number is over the
Viewer display limit of 5 M. Attempting to load a file containing 5 million or more data
points. 3-2
W3115 Converting operation exceeded the
limitation of MS Excel.
Change the range to be converted so that it is within the
allowed range of Excel. 3-25
W3116 Converting operation exceeded the
limitation of Lotus 1-2-3.
Change the range to be converted so that it is within the
allowed range of 1-2-3. 3-25
E0212 Can’t read file. The file cannot be loaded, or the file has been deleted. 3-2
E3120 Not an MX file. Cannot load the file. 3-2
Error Messages on the Calbrator
Code Message Correctve Acton Reference Page
W4700 Connection failure.
Check the IP Address/Host Name.
To change the network settings such as the IP address,
start the Logger. 2-3
W4701 Failed to write the calibrated value. Recalibrate. If still displayed, service required. 4-3 to 4-7
W4702 Failed to calibrate. Recalibrate. If still displayed, service required. 4-3 to 4-7
5.2 Error Messages and Ther Correctve Actons