Yokogawa DAQWORX - Manual (Page 24)

1-17 IM WX103-01E
1
2
3
4
5
Index
Before Us
ng the Software
Click the button on the Logger toolbar or
choose Data Viewer from the File menu.
If the Logger is not running, choose Programs > YOKOGAWA DAQWORX > MXLOGGER > Viewer.
The Viewer window
appears.
Start the
Viewer
For details, see
section 1.5.
Click the button on the toolbar or choose Open from the File menu.
2
Click here. 3
Select the folder that was specified as the save
destination of the record file.
Information about
the selected file
4 Select the file
you wish
to load.
5 If you open a data file that was recorded using the Logger, a dialog box opens asking you
whether you wish to synchronize the data file before the waveform display window opens.
6
Waveform
display
window
Switch the
display group
Y-axis Channel ON/OFF
Grid density
Channel number and unit
Background
color density
Switch the display zone
Switch the active channel
Alarm display
ON/OFF
Clip ON/OFF
Zone display
section ON/OFF
1
Click Yes or No.
Switch between channel number,
tag No., and tag comment
Move the cursor to the
point wherethe alarm changed
* The time stamp of the MX100 main module
is attached to the data. The measurement
time is corrected by synchronizing. If you are
not synchronizing the data, a Select Unit No.
dialog box opens. Select the unit.
The Open dialog box opens.
Display the recorded
data
For details,
see section
3.1 and 3.2.
Switch the grid density
1.2 MXLOGGER Operaton Gude