Yokogawa DAQWORX - Manual (Page 17)

1-10 IM WX103-01E
1 Click here.
Set up analog output
For details, see
section 2.8.
4 Select Output/Not output.
3 Select the output action.
Channel number
2 Click PWM Channel.
To set the span of PWM output, output action,
pulse, and pattern output, scroll to the right.
Setup display/input area
for individual channels
5 Select the reference
channel for
transmission output
4 Select the output action.
3 Select Output/Not output.
Channel number 5 Select the reference
channel for
transmission output
Click here to hide
the right area
1 Click here. 2 Click AO Channel.
To set the range of analog output, span, output action,
and pattern output, scroll to the right.
Setup display/input area
for individual channels
Click here to hide
the right area
Set up PWM output
For details, see
section 2.8.
1.2 MXLOGGER Operaton Gude