Yokogawa DAQWORX - Manual (Page 13)

1-6 IM WX103-01E
1
Click the button or the word Undefined to select the measurement group on each
module or click Auto Assignment to automatically assign suitable measurement groups.
If you click the Auto Assignment button, the Auto Assignment dialog box opens.
Click OK.
Drag and drop the icon of the MX100 you wish to connect to the
Configuration area.
To retrieve current module information
2
Used when changing the unit number of the MX100
(move up or down) or when adding/deleting the MX100
Select the check box to delete the old data
and save the data to the CF card repeatedly.
When assigning the module to the measurement group
(see the figure below)
Assign measurement groups in the Meas Groups area
Drag and drop the module icon to the Meas Group area.
To check which MX100 is connected
(When clicked, the word "--CALL--"
appears on the 7-segment LED
of the main module.)
Configure the system
For details, see
section 2.2.
Click Yes when the dialog box below opens.
Module name
To check the size
of the CF
Click the button or the word Undefine to select the measurement group on each
module or click Auto Assignment to automatically assign suitable measurement groups.
If you click the Auto Assignment button, the Auto Assignment dialog box opens.
Click OK.
Select the A/D integral time Select the temp. unit
1.2 MXLOGGER Operaton Gude