Yokogawa DAQWORX - Manual (Page 132)

3-19 IM WX103-01E
1
2
3
4
5
Index
V
ewer
Clearng Cursors
From the Edt menu, choose Erase Cursor.
The cursors are cleared as well as the cursor values displayed in the Control dialog box.
Explanaton
Readng Measured/Computed Values Usng Cursors
Two cursors can be displayed. The following values can be read on the Control window.
• Values at the cursors.
• Difference in the value between the cursors.
• Absolute time and data number at the cursor position.
• Time between the cursors and the difference between the data numbers.
• Alarm status of the value at the cursor.
Note
• The cursors used to display cursor values and those used to specify the interval for
statistical computation over an area are the same.
• The Cursor Value window and the Statistics window can be displayed simultaneously.
• If you click the tab of another group on the waveform display window while the Cursor Value
window is open, the cursor values of the selected group are displayed on the Cursor Value
window.
• You can change the cursor positions on the waveform display window while the Cursor
Value window is open.
• If you choose Select All from the Edit menu, Cursor A is displayed at the first data position
and Cursor B is displayed at the last data position.
3.3 Readng Values Usng Cursors