Yokogawa DAQWORX User Manual

Page 98

Advertising
background image

2-68

IM WX103-01E

Y-Axs Type

You can select linear or logarithmic scale for the Y-axis when displaying the waveforms.

Linear

Logarithmic

Maxmum and Mnmum Values of the Y-Axs and the Dsplay Format of the
Scale Values

Specify the maximum and minimum values of the Y-axis scale. The scale values can also

be displayed using logarithmic format as shown below.

Select the exponential

format

Selectng the Dsplay Zone of the Waveform

You can select from the following. In the Zone setting on the General Display Settings

window, assume the bottom and top edges of the waveform display area to be 0% and

100%, respectively, and set the waveform display position by specifying the minimum

value (0 to 99%) and the maximum value (1 to 100%).

• User Zone
Displays each waveform at the position specified by Zone on the General Display

Settings window. A single Y-axis scale of the active waveform is displayed.

Select user zone

Click the bar to specify the

Y-axis you wish to activate

Displays the active Y-axis scale

Indicates the active Y-axis

Set the display zone

• Edit Zone
Like the user zone, each waveform is displayed at the position specified by Zone

on the General Display Settings window. However, you can change the zone on the

Trend Monitor window. A single Y-axis scale of the active waveform is displayed.

Select edit zone

Drag the knob to change the minimum/maximum

value of the zone separately

Drag the bar to change the zone position without

changing the zone width

2.10 Startng/Stoppng Data Montorng and Dsplayng the Montor

Advertising
This manual is related to the following products: