Yokogawa DAQWORX - Manual (Page 110)

2-80 IM WX103-01E
Explanaton
Montor Server Functon
The Monitor Server function allows PCs running the following software programs to
monitor the data that the MXLOGGER is monitoring.
• AddObserver
• AddObserver Runtime
• AddMulti
• AddTrigger
The MXLOGGER can hold up to 61 data memories*. A system No. between 0 and 60 is
assigned to each data memory according to the monitor interval of the individual units
specified on the Logger. Each system number has information on the unit No., the
channel range, the monitor interval, and the number of channels.
Clients (PCs running AddObserver, AddObserver Runtime, AddMulti, or AddTrigger) can
monitor the data by specifying this system number.
For instructions on monitoring the data on each software program, see the user’s manual
for each software.
* Each unit (MX100) has three monitor intervals, and the MXLOGGER can connect up to
20 MX100s. Therefore, the maximum number of data memories is 3 × 20 = 60. Adding the
monitor interval of the computation channel makes it 61.
Host name (computer name) of the connected client
Maximum number of connections: 32
Number of channels
Number of channels being monitored within the channel range
System No.
Number assigned to each data memory (0 to 60)
Monitor interval
Data monitor interval of the respective measurement group
Channel range
Channel range corresponding to the unit NO. and monitor interval
Unit No.
Unit number on the Logger
00 [Meas.] to 19 [Meas.]: Measurement data that the MX100 acquired
99 [Math]: Computed data
Port Numbers
The default value is 50284. Unless other software programs are using a different port
number, it is recommended that this port number be used.
2.14 Settng Up the Montor Server