Yokogawa DAQWORX - Manual (Page 99)

2-69 IM WX103-01E
1
2
3
4
5
Index
Logger
• Full Zone
Displays all the waveforms over the full zone of the waveform display area regardless
of the Zone settings on the General Display Settings window. A single Y-axis scale of
the active waveform is displayed.
Select full zone
Waveform display area (full zone)
• Slide Zone
Displays the waveforms by slightly offsetting the display position of each waveform
vertically regardless of the Zone settings on the General Display Settings window. A
single Y-axis scale of the active waveform is displayed.
Select slide zone
Slide in this manner
• Auto Zone
Displays the waveforms by dividing the waveform display area evenly according to
the number of displayed waveforms regardless of the Zone settings on the General
Display Settings window.
Select auto zone
Divided evenly automatically
• Multi-Axes Zone
All the Y-axes of the displayed waveforms are aligned horizontally. To hide a Y-axis,
clear the Y-Axs check box on the General Display Settings window. The display zone
is set to the position specified by Zone on the General Display Settings window.
Turn OFF the Y-axis
display of Ch00002
The scale of Ch00002 is not displayed.
Select multi-axes zone
Click the bar to move the
specified Y-axis to the left end
Indicates the active Y-axis
2.10 Startng/Stoppng Data Montorng and Dsplayng the Montor