Yokogawa DAQWORX - Manual (Page 103)

2-73 IM WX103-01E
1
2
3
4
5
Index
Logger
A Cursor’s Values window opens as shown below.
Channel number
Waveform
display color
Time between Cursors A and B
Time at Cursor B
Time at Cursor A
(Readout value of Cursor B) – (readout value of Cursor A)
Readout value of Cursor B
Readout value of Cursor A
To clear the cursors, choose Erase Cursor from the View menu.
Choose this.
Explanaton
Pausng the Updatng of the Waveform Dsplay
While monitoring the waveform, you can pause the updating of the waveform display and
check the past waveforms.
Pausing the display on the numeric display holds the current values immediately before
the pause operation on display.
Readng Measured/Computed Values Usng Cursors
When the updating of the waveform display is paused, you can read values using
cursors. Two cursors can be displayed. Below are the values that can be read using
cursors.
• Values at the cursors.
• Difference in the value between the cursors.
• The time at the cursor position.
• The time between the cursors.
2.11 Pausng/Resumng the Updatng of the Montor Dsplay and Readng Measured Values Usng Cursors