Yokogawa DAQWORX - Manual (Page 114)

3-1 IM WX103-01E
1
2
3
4
5
Index
V
ewer
3.1 Loadng Data Fles
Procedure
1. Start the Viewer.
2. From the Fle menu, choose Open.
You can also click the button on the toolbar.
The Open dialog box opens.
File information
In the case of data saved using the
Integration Monitor of the MX100
Standard Software, MX100 Standard
Logger is displayed by Creator.
3. Select the file you wish to load and click Open.
The waveform display window opens.
If you open data files that were recorded using the Logger of the MXLOGGER or the
Integration Monitor of the MX100 Standard Software, a dialog box is opened with
the message, “File not synchronized. Synchronize data file?” before the waveform
display screen appears. To synchronize the data, click Yes, otherwise, click No.
If you open a file containing recorded data of multiple MX100s and you click the
No button, the Select Unit No. dialog box opens. Click the desired MX100 unit
number to display the data corresponding to the unit. When displaying data without
synchronization, data of different units cannot be displayed simultaneously.
Opening Data Saved to the CF Card on the MX100
Before the waveform display window is displayed, if a CF file that can be joined
exists, a dialog box appears with the message “Join Related Files?” To join the data
files, click Yes, otherwise, click No.
Chapter 3 Vewer