Yokogawa DAQWORX - Manual (Page 115)

3-2 IM WX103-01E
The waveforms of the measurement channels and math channels are divided by the Mon.
Interval specified on the Acquisition screen of the Logger even when in the same group.
Click the unit number
Synchronized file
A file with .mxs extension
Unsynchronized file
A file with .mxd extension
Note
If you click the Yes button in the synchronization confirmation dialog box when a synchronized
file already exists, the message dialog box below opens. Click OK to load the synchronized file
and open the waveform display window.
Explanaton
Loadable Fles
• Data files recorded using the Logger of the MXLOGGER or the Integration Monitor of
the MX100 Standard Software (.mxd extension).
• Data files saved after performing synchronization using the Viewer (.mxs extension).
• Data files saved to the CF card using the MX100 (.mxd extension).
• Data files saved after being joined on the Viewer (with the .mxc extension)
Dsplay Range, Fle Sze, and Number of Data Ponts of the Loadable Data
• 50 groups
• Maximum channels per group: 32
• Example: 2 GB
• Data points: 5 million
Note
• When loading a file of close to five million points, the error message “Insufficient Memory.
Close immediately.” appears. If this happens, set Total paging file size for all drives to 2 GB
or more. On PC, you can change the setting in the dialog box that opens by choosing from
the System Propertes dialog box, Advanced > Settngs under Performance > Advanced
> Change under Vrtual memory.
• Please avoid loading multiple files containing close to five million data points. Doing so may
degrade the PC performance greatly.
3.1 Loadng Data Fles