Yokogawa DAQWORX - Manual (Page 101)

2-71 IM WX103-01E
1
2
3
4
5
Index
Logger
Addng Marks
You can display marks in the waveform display area (see the figure below). You can
enter a text to be attached to the mark (“Mark” by default) using up to 15 characters.
Click the Mark button or choose Mark Configuration from the Action menu. You can enter
the text in the dialog box that opens.
Click either one
Up to two hundred marks can be displayed. When two hundred is exceeded, marks are
overwritten starting from the oldest ones. However, when recording is in progress, the
marks that are overwritten are saved to the data file.
Mark Mark setup dialog box Text of the specified mark
Enter the text to be
displayed as a mark
If this check box is selected, the mark is placed without
displaying the dialog box when you choose Put a Mark
from the Action menu.
Note
Marks cannot be placed when the monitor update is paused.
Grd Densty
You can change the displayed grid density. The available settings are standard, dense
grid 1, or dense grid 2.
Standard Grid Dense Grid 1 Dense Grid 2
2.10 Startng/Stoppng Data Montorng and Dsplayng the Montor