Yokogawa DAQWORX - Manual (Page 148)

4-4 IM WX103-01E
The figure below is an example of the 10-CH, Medium-Speed Universal Input
Module. Channels are not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement range
to be calibrated from the list
The figure below is an example of the 30-CH, High-Speed Analog DCV/TC/DI Input
Module. A range is not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement range
to be calibrated from the list
The figure below is an example of the 6-Channel, Medium-Speed, Four-Wire RTD
Resistance Input Module. Channels are not selected.
Items to be calibrated
You can also click to select
To move to the calibration
execution screen 1
Select the measurement range
to be calibrated from the list
4.2 Calbraton Procedure