Yokogawa DAQWORX - Manual (Page 78)

2-48 IM WX103-01E
Rectangular Waveform Output
1. Click the Rectangular Waveform Output button.
2. Enter the pattern interval in the Interval box.
3. Enter the pattern duty ratio in the DUTY Rato box.
4. Enter the maximum setting value for pattern output in the Max box. Or, enter the
minimum setting value for pattern output in the Mn box.
5. Enter the number of points in the Pont Num. box.
6. Click the Generate Automatcally button to create the pattern.
Enter the pattern DUTY ratio*
Enter the pattern interval
Enter the minimum and
maximum setting value
for the pattern output
Enter the number of points Click here
Minimum setting
Maximum setting
*DUTY ratio = x 100 [%]
Interval
d
Interval
d
Execute the “Generate Automatically” function
Trapezodal Waveform Output
1. Click the Trapezodal Waveform Output button.
2. Enter the time for the pattern’s slope in the Ramp Tme box.
3. Enter the time for the pattern’s constant portion in the Soak Tme box.
4. Enter the maximum setting value for pattern output in the Max box. Or, enter the
minimum setting value for pattern output in the Mn box.
5. Enter the number of points in the Pont Num. box.
6. Click the Generate Automatcally button to create the pattern.
2.8 Analog/PWM Output Settngs