Yokogawa DAQWORX - Manual (Page 30)

1-23 IM WX103-01E
1
2
3
4
5
Index
Before Us
ng the Software
1.5 Startng and Extng Software Programs
Procedure
Startng the Software Programs
As shown in the figure below, choose Start > Programs > YOKOGAWA DAQWORX >
MXLOGGER > Logger, Vewer, or Calbrator.
Note
If you enable the automatic start function, Logger starts automatically upon starting of
monitoring/recording. For details, see section 2.3, “Setting the Data Acquisition Conditions.”
Extng the Software
From the Fle menu, choose Ext.
The figure below shows an example for the Logger.
Note
When exiting the Viewer, a dialog box used to confirm whether the display settings are to be
saved opens if the display settings have been changed.