Yokogawa DR240 - Manual (Page 122)

6-5 IM DR232-01E
6
Setting the Recording Conditions
6.2 Setting the Chart Speed
Chart Speed 1 (CHART)
This setting specifies the chart speed of ordinary trend recordings. The setting ranges from 1 to
1500mm/h, in 1 mm steps. The default setting is 100mm/h.
Chart Speed 2 (CHART2)
This setting consists of a chart speed and recording interval. Depending on the Event/Action
function (refer to 9.1 on page 9-1), the chart speed and recording interval will change into chart
speed 2 and its corresponding interval.
• Chart speed 2 setting
This setting is the same as for chart speed 1, and its default setting is 100mm/h.
• Recording interval
This setting specifies the recording interval for the digital prinout in the logging and analog
trend recording mode. One type of recording interval can be set. The setting is done the same
way as described on page 6-3, although only one type can be set.