Yokogawa DR240 - Manual (Page 126)

6-9 IM DR232-01E
6
Setting the Recording Conditions
Tag Setting
A tag of up to 16 characters can be assigned to each channel. If the instrument is equipped with
the optional computation function or floppy disk drive, this setting can also be made for
computation channels A01 to A60. The characters/numbers for the tag can be selected by cursor
from the displayed row on sub-display 1. For details on the number of characters which will be
printed, refer to 10.2 on page 10-4. For details on the number of characters which will be
displayed, refer to 4.1 on page 4-2. To select whether the tag or channel number are displayed/
printed, refer to 10.2 on page 10-4. The default settings are all spaces. For details concerning
entering characters/numbers, refer to page 6-15.
Digital Printout Setting (DIGITAL PR)
This setting can be selected for each channel from the following. This setting applies to the digital
print of the analog mode and logging mode. The default setting is ON.
OFF: Digital printout will not be carried out for this channel;
ON: Digital printout will be carried out for this channel.
The recording interval can be selected from the following. For details on LOG INTERVAL, refer
to 10.2, page 10-6.
If the instrument is equipped with the optional computation function or floppy disk drive, this
setting can also be made for computation channels A01 to A60.
When LOG INTERVAL is set to SINGLE:
The recording interval is decided automatically, depending on the chart speed, and the columns
of channels to be printed.
When LOG INTERVAL is set to MULTIPLE:
The recording interval can be selected from six timer settings. The default value is 1. For
details on the timer setting, refer to 6.1, page 6-3.
Columns selecting
Refer to 10.2, page 10-5.
Manual Printout Setting (MANUAL PR)
This setting can be selected from the following. The default setting is ON.
If the instrument is equipped with the optional computation function or floppy disk drive, this
setting can also be made for computation channels A01 to A60.
OFF: Manual printout will not be carried out for this channel;
ON: Manual printout will be carried out for this channel.
6.4 Setting Tag, Digital Printout and Manual Printout