6 setting recording colors, Setting recording colors -14, Setup=color – Yokogawa DR240 User Manual

Page 175: 01:color=purple, Color set, Set up

Advertising
background image

10-14

IM DR232-01E

10.6 Setting Recording Colors

D I S P

M O D E

P R I N T

F U N C

I N S

D E L

R A N G E A L A R M

S E T

C H A R T

E N T E R

F E E D

M. F U N C 1

M. F U N C 2

RECORD

ALARM

CHART

KEYLOCK

R E C O R D

SETUP=COLOR

D_INTG FILTER RELAY BURN_OUT RJC COLOR

>Select Setting Parameter

E S C

• Enter the SET UP menu in the following procedure:

1. When the display presents the operation display mode or a menu other than the SET UP

menu, first turn off the power switch.

2. Turn the switch back on while pressing the DISP key and continue pressing the DISP key

for about 5 seconds.

• Select/set

using the

keys.

• If exiting the following lower menu setting halfway, press the MODE (ESC) key. The display

returns to the main menu to which the lower menu belongs. However, newly set or selected
contents are canceled.

• When setting proceeds to the display for the setting end, the newly set or selected contents are

established.

ENTER

ENTER

ESC

COLOR

001-01:COLOR=PURPLE

>Select Channel No.

001-01:COLOR=PURPLE

>Select Channel No.

001-01:COLOR=PURPLE

PURPLE RED GREEN BLUE BROWN

BLACK NAVY YEL_GR RED_PR ORANGE

***COLOR SET***

( M a i n m e n u )

( L o w e r m e n u )

SET UP=

Setting Recording Color

Set the recording colors for each channel. This setting can also be made for optional computation
channels.
• Select a color from the following ten colors:

PURPLE, RED, GREEN, BLUE, BROWN, BLACK, NAVY (navy blue), YEL_GR (yellowish
green), RED_PR (redish purple), and ORANGE

• The default setting is PURPLE for channel

1, RED for channel

2, GREEN for channel

3, BLUE for channel

4, BROWN for channel

5, BLACK for channel

6,

NAVY for channel

7, YEL_GR for channel

8, RED_PR for channel

9, and

ORANGE for channel 0.
Enter a unit number and a slot number in the two boxes

.

Note

• In order to make the set or selected contents effective, the contents must be registered. For details, see

page 10-23.

• To return from the SET UP menu to the operation display mode, select END in the main menu. For

details, see page 10-23.

Advertising
This manual is related to the following products: