Yokogawa DR240 - Manual (Page 26)

1-11 IM DR232-01E
1
System Configuration
1.4 Floppy Disk
A floppy disk drive is provided with the DR232-1 and DR242-1.
Applicable Floppy Disks
3. 5-inch floppy disks can be used for this instrument. They can also be formatted on this
instrument.
• 2HD type: 1.2 MB or 1.44 MB (MS-DOS format)
• 2DD type; 720 MB (MS-DOS format)
Inserting a Floppy Disk into the Drive
Insert the floppy disk into the floppy disk drive, shutter side first and with the label face up.
Make sure that the floppy disk is inserted until the eject button pops up.
Removing the Floppy Disk from the Drive
Make sure that the access indicator is not lit, then push the eject button to remove the floppy disk.
eject button
access indicator
CAUTION
If the floppy disk is removed when the access indicator is still lit, damage to
the magnetic head of the floppy disk drive or to data saved on the floppy
disk may result. Before removing the floppy disk, always make sure that
the access indicator is OFF.
General Precautions Regarding Handling of Floppy Disk
For general precautions regarding handling of floppy disks, refer to the instruction manual
provided with the disk.