Avaya C460 - Manual (Page 133)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 121
Example:
set port vlan-binding-mode
User level: read-write, admin.
Use the set port vlan-binding-mode command to define the binding method
used by ports.
The syntax for this command is:
set port vlan-binding-mode [port_list] [value]
Example:
set power redundancy
User level: read-write, admin.
Use the set power redundancy command to enable or disable PSU (power
supply) redundancy.
C460-1# set port vlan 2 3/5
VLAN 2 modified.
VLAN Mod/Ports
---- ---------------------------
2 3/5
port list Switches and ports to bundle (format: module/port)
value • static – the port supports only the VLAN as configured per
port
• bind-to-configured – the port supports the VLANs
configured on the device
• bind-to-all – the port support the whole range of VLANs
on the device
C460-1# set port vlan-binding-mode 5/5-9 static
Set Port vlan binding method:5/5
Set Port vlan binding method:5/6
Set Port vlan binding method:5/7
Set Port vlan binding method:5/8
Set Port vlan binding method:5/9