Avaya C460 - Manual (Page 23)

Chapter 1 Using the CLI
Avaya C460 Reference Guide 11
Router Configuration Contexts
You can either use the general C460 commands available from the
Router(configure)# prompt
or you can enter one of two router configuration
context modes:
•
Router interface context:
This allows you to define parameters individually for each interface. To enter
this context, type interface <interface_name>
The prompt changes to Router>(config-if:<interface_name>)#
• Router protocol context:
This allows you to define parameters for a specific routing protocol (RIP, OSPF,
and VRRP). To enter this context, type router <protocol_name>
The prompt changes to Router>(configure router:protocol_name)#
To exit these context modes, type the command exit.