Avaya C460 - Manual (Page 94)

Chapter 2 Avaya C460 CLI Commands
82 Avaya C460 Reference Guide
Example:
set boot bank
User level: read-write, admin.
Use the set boot bank command to set the system boot bank (for the active
Supervisor Module).
The syntax for this command is:
set boot bank <value>
Example:
set broadcast storm control
User level: read-write, admin.
Use the set broadcast storm control command to enable or disable
broadcast storm control.
The syntax for this command is:
set broadcast storm control <enable|disable>
Example:
C460-1# set arp-tx-interval 15
ARP tx interval was set to 15 seconds.
value • bank-a – set the boot bank to A
• bank-b – set the boot bank to B
C460-1# set boot bank A
boot bank is A
enable Enable broadcast storm control
disable Disable broadcast storm control
C460-1# set broadcast storm enable
Done!