Avaya C460 - Manual (Page 215)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 203
Example:
show rmon event
User level: read-only, read-write, admin.
Use the show rmon event command to show the parameters of an Event entry
defined by the rmon event command on Page 76 or using the C460 Manager.
The syntax for this command is:
show rmon event [<Event Index>]
Example:
C460-1> show rmon alarm 1026
alarm
alarm 1026 is active, owned by amir
Monitors ifEntry.1.1026 every 60 seconds
Taking delta samples, last value was 1712
Rising threshold is 10000, assigned to event # 1054
Falling threshold is 10, assigned to event # 1054
On startup enable rising or_falling alarms.
Alarm Index History index defined using rmon event command or the
C460 Manager
C460-1> show rmon event 1026
event
Event 1054 is active, owned by amir
Description is event for monitoring amir's co
Event firing causes log and trap to community public,last
fired 0:0:0