Avaya C460 - Manual (Page 176)

Chapter 2 Avaya C460 CLI Commands
164 Avaya C460 Reference Guide
routing table.
The syntax for this command is:
show ip route
show ip route best-match
User level: read-only, read-write, admin.
Use the show ip route best-match command to display a routing table for a
destination address.
The syntax for this command is:
show ip route best-match <dst addr>
Example:
show ip route static
User level: read-write, admin.
Use the show ip static route command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
Router-1> show ip route
Network Mask Next-Hop Interface Source
---------------- ---------------- ---------------- ----------- ------
149.49.77.0 255.255.255.0 149.49.77.70 inband LOCAL
0.0.0.0 0.0.0.0 149.49.77.1 inband STATIC
dst addr IP address
Router-1> show ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network Mask Interface Next-Hop Cost TTL Source
--------------- ------------------------------------------------ -----
199.93.0.0 255.255.0.0 e-135new 135.64.76.1 1 n/a STAT-HI
ip-address The IP address of the routes
mask The ip mask of the routes.