Avaya C460 - Manual (Page 151)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 139
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
set vlan (Layer 3)
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Use the set vlan command to create a router Layer 2 interface.
The syntax for this command is:
set vlan <vlan-id> name <vlan-name>
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
set web aux-files-url
User level: read-write, admin.
Use the set web aux-files-url command to allow the Device Manager to
automatically locate the URL of the Web server containing the Device Manager help
files and Java plug-in.
Tip: Ensure that the Web server is always accessible to prevent potential delays to
Web access to the device.
The syntax for this command is:
set web aux-files-url <//IP address/directory name>
vlan-id Interface Index
vlan-name Interface name (used in layer 3 protocols)
C460-1(configure)# set vlan 2 name vlan2