Avaya C460 - Manual (Page 195)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 183
show license
User level: read-only, read-write, admin.
Use the show license command to display the current licenses installed on the
chassis
The syntax for this command is:
show license
Example:
show logout
User level: read-only, read-write, admin.
Use the show timeout command to display the amount of time the CLI remains
idle before timing out in minutes.
If the result is 0, there is no timeout limit. The default is 15 minutes.
The syntax for this command is:
show logout
Example:
show mac-aging
User level: user, privileged, supervisor
Use the show mac-aging command to display the current status of the MAC
aging function.
The syntax for this command is:
show mac-aging
C460-1> show license
Application License Key State level
-------------- ----------------------------- ------------- -------
smon 0000 0000 0000 0000 0000 0000 unlicensed 0
routing 000 000 000 000 000 000 licensed 10
C460-1> show logout
CLI timeout is 10 minutes