Avaya C460 - Manual (Page 140)

Chapter 2 Avaya C460 CLI Commands
128 Avaya C460 Reference Guide
The syntax for this command is:
set slot power priority <slot> <level>
Example:
set snmp community
User level: read-write, admin.
Use the set snmp community command to set or modify the switch’s SNMP
community strings.
The syntax for this command is:
set snmp community <read-only | read-write | trap> [community
string]
Example:
set snmp retries
User level: read-write, admin.
Use the set snmp retries command to set the number of retries initiated by the
C460 Manager when it tries to send SNMP messages to the switch.
The syntax for this command is:
set snmp retries <number>
Slot Slot number:
• 3 to 6
• all
level • critical
• high
• low
C460-1# set slot power priority 3 high
Slot 3 is set to power priority high
C460-1# set snmp community read-only read
SNMP read-only community string set
number Number of retries