Avaya C460 - Manual (Page 137)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 125
set radius authentication retry-time
User level: read-write, admin.
Sets the time to wait before re-sending an access request.
The syntax for this command is:
set radius authentication retry-time <time>
Example:
set radius authentication secret
User level: read-write, admin.
Use the set radius authentication secret command to enable secret
authentication for the P330 unit.
The syntax for this command is:
set radius authentication secret <string>
Example:
set radius authentication server
User level: read-write, admin.
Sets the IP address (and shared secret) of the primary or secondary RADIUS
Authentication server.
The syntax for this command is:
set radius authentication server <ip-addr> {primary |
secondary}
time Retry time in seconds
C460-1(super)# set radius authentication retry-time 5
string text password
C460-1(super)# set radius authentication secret hush
ip-addr IP address of the RADIUS authentication server
primary default - Primary authentication server