Avaya C460 - Manual (Page 241)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 229
Example:
username
User level: admin.
Adds a local user account.
L By default there is only a single user account, named 'root', with password
'root', which access the administrator level. You cannot delete this basic user
account, nor modify its access level, but can modify its basic password.
The syntax for this command is:
username <name> password <passwd> access-type {read-only|read-
write|admin}
C460-1> tree 1
session
terminal width
terminal length
clear screen
show logout
show time
show timezone
show snmp
show intelligent-multicast
show port
show trunk
show spantree
show vlan
show spv
show cam
show powerinline
show icmp-redirect
show interface
show outband
show device-mode
show access-lists
show system
show module
--type q to quit or space key to continue--
name New user name (minimum four characters)
passwd User’s password (minimum four characters)