Avaya C460 - Manual (Page 33)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 21
Example:
clear port static-vlan
User level: read-write, admin.
Use the clear port static-vlan command to delete VLANs statically
configured on a port.
The syntax for this command is:
clear port static-vlan [module/port range][vlan num]
Example:
clear radius authentication server
User level: read-write, admin.
Removes a primary or secondary RADIUS authentication server.
The syntax for this command is:
clear radius authentication server [{primary|secondary}]
source port Source port number
dest module Destination module number
dest port Destination port number
C460-1# clear port mirror 9/2/10/4
this command will delete the port mirror entry
- do you want to continue (Y/N)? y
Mirroring packets from port 9/2 to port 10/4 is cleared
module/port range Port range
vlan num The VLAN to unbind from the port
C460-1# clear port static-vlan 3/10 5
VLAN 5 is unbound from port 3/10
primary Remove primary RADIUS server
secondary Remove secondary RADIUS server