Avaya C460 - Manual (Page 177)

Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide 165
Example:
show ip route summary
User level: read-only, read-write, admin.
Use the show ip route summary command to display the number of routes
known to the switch.
The syntax for this command is:
show ip route summary
Example:
show ip traffic
User level: read-only, read-write, admin.
Use the show ip traffic command to display the IP traffic statistics counters.
The syntax for this command is:
show ip traffic
Router-1> sh ip route static
Showing 34 rows
Network Mask Interface Next-Hop Cost PrefActive
------------- ----------------------------------------------------
10.0.8.0 255.255.255.0e-36 149.49.36.11 1 high Yes
135.0.0.0 255.0.0.0 e-135new 135.64.76.11 high Yes
135.64.0.0 255.255.0.0 e-135 135.87.164.1 1 high No
149.49.0.0 255.255.0.0 zevel10.10.254.2531lowYes
149.49.2.0 255.255.255.0n/av-Route-FW1highYes
Router-1> sh ip route summary
IP Route Summary:
Current number of routes: 69