Validate policy-list – Avaya C460 User Manual
Page 243
Advertising
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
231
validate policy-list
User level: read-write, admin.
L If you are at the “read-write” user level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode.
Use the validate policy-list command to verify that all the rules in a priority
list are valid.
L If there is a configuration problem with a specific rule, or with a number of
rules, detailed error messages will be given.
The syntax for this command is:
validate policy-list
<policy-list-number>[quiet]
Example:
quiet
does not display error messages
C460-1(configure)# validate policy-list 101
Advertising